Vein-cut travertine reads the block along its bedding plane — the slab arrives in long horizontal currents of ivory and warm stone, the natural cavities aligned in fine linear bands. The Cemento sandblast is a controlled texture: the surface is broken open just enough to register on the hand, then dressed flat so the linear grain stays legible.

This piece is 2cm, vein-cut, in a working size of 63″ × 116″. Best deployed where the horizon matters — bathroom feature walls, exterior cladding, fireplace surrounds, vein-running islands. The sandblast keeps the slab matte and soft in sun, and gives it grip underfoot when run as flooring.

The installed reference pictured below shows the stone doing what it does best — a wrapped fireplace mass with a long horizontal hearth filled with grey lava pebbles, flanked by fluted white oak millwork and a tall back niche of the same travertine run vertically. The Cemento sandblast reads correctly here in warm interior light: the cavities catch shadow, the ivory ground stays matte, the linear bedding draws the eye laterally across the room. Note how the unfilled vug structure absorbs the firelight rather than reflecting it — the right finish call for a hearth surround, where polished travertine would have gone glassy and cheap.

The slab is on the floor at 2303 South Sepulveda. Walk it in daylight before placing — the Cemento texture changes character with the light.